Measuring the Internet – Part I: Distributed nmap
Last month, I participated in a project that involved the scanning of a whole continent. The goal of the project was to report, within 20 days, how many hosts were running a specific service. This type of measuring is not an easy task. According to the Internet Systems Consortium, Inc., the number of Internet hosts by January 2012 ascended to 888,239,420 hosts¹. These hosts are distributed along a very large number of networks, making the scanning task yet more complex.
You may ask, “What is this for? What information could a scan like this give us?”
This type of scanning may provide valuable information for different areas:
- In marketing, this information could be highly valuable to sell and promote some services or products.
- In research, this information could help diagnose some problems and to know exactly the amount of services running.
- In testing network tools, it can be used for performance improvements.
- It could open the door for new markets and business.
- For fun. It is really amusing to be able to know what is happening out there.
Unfortunately, the value of this information decreases over time. That is why the duration of the project is very important to be successful. Also, in order to quickly scan a huge number of networks in a reduced period of time it is highly necessary to develop a methodology to automate the scans.
This is a series of two articles that will cover:
- Measuring the Internet – Part I: Distributed nmap
Most of the professionals working in the security field have heard about nmap. Nmap is the de facto standard tool to find active hosts and running services. But when you have to scan thousands of networks, the most important problem to overcome is the bandwidth needed. Most countries in the world have a small bandwidth, and therefore to distribute the scan is a good approximation to face this problem. This first article will cover a tool that was developed with the intent to avoid this limitation: dnmap, the distributed nmap. We will cover its history, details and usage.
- Measuring the Internet – Part II: the methodology
Having a tool to distribute the scans is necessary, but it is not enough. Without a plan to organize the scan, it could be really messy to obtain good results. In the second part of the article, a methodology to carry these huge scans is presented. The four phases of this methodology, born from experience, will guide you on how to carry on a project for services measuring using dnmap.
Dnmap, the distributed nmap
How do we share our bandwidth with friends to speed up the network scans? dnmap!
When our project started, we realized that we needed to scan millions of networks. The first decision we made was to scan one country at a time, thus reducing the amount of networks to scan. However, the amount of networks was still huge. Furthermore, our bandwidth was small, allowing us to run only two nmap commands simultaneously. Consequently, the first estimated finish time to scan one small country alone was more than 4 years.
Because we wanted to deliver the results in 20 days, we clearly needed another approach to solve this problem. Our first attempt was to speed up the scans creating a file with nmap commands, and sharing it with our trustworthy friends. Each one of them had to read some commands, execute them, and mark them as ‘scanned’ to let the others know.
The main advantage of this approach was:
- Multiple nmap commands were running in parallel. This increased the speed of the global scan.
The main disadvantages of this approach were:
- The users had to be constantly selecting commands, executing commands, and marking them in the file. This is a time-consuming task, which would be too much for anyone.
- The nmap results were distributed among the computers of all our friends, and they then became difficult to track and verify.
To solve these disadvantages, we opted to automate this process. We needed a tool to automatically distribute nmap commands along the connected users and store the results locally. That’s how dnmap was born.
Dnmap, is a free software framework that distributes nmap commands into several clients. It was written by the Argentinean Sebastián García, co-founder of the MatesLab² hackspace, in response to the need of increasing the speed and efficacy of huge network scans.
Based on twisted³, a python networking engine, dnmap implements a client-server architecture allowing clients to execute the commands provided by the server.
In the last version of the tool, some basic security measures were implemented in order to protect clients from executing malicious commands. However, clients should never connect to unknown servers.
Dnmap server contains the logic to automatically distribute a set of nmap commands into all the connected clients and store the results in the server. The following scheme illustrates the behavior of the tool:
Dnmap server has three main functionalities:
- Allows clients to remotely connect to it.
- Distributes nmap commands to the connected clients.
- Stores the client scanning results locally.
Figure 1 shows a preview of the configurable options that this tool offers:
Figure 1 – Help – dnmap_server.py
Some of the major features dnmap presents are:
- Allows you to specify the port number to use, by default it uses the port 46001.
- Allows you to set a custom log file name.
- It is possible to customize the client timeout. The client is considered offline if no responses are received within this time.
- The data between client and server are encrypted using the TLS protocol.
- It generates a very detailed log file.
Shows information and statistics in real-time about the clients connected:
(Figure 2 shows how dnmap presents this information)
- MET (Mission Elapsed Time).
- Amount of Online Clients.
- Amount of executed commands.
- Last time seen.
- Time since the last data sent from client.
- Version of the client.
- Shows if the client was executed with root privileges or not.
- Running average⁴ of executed commands per minute.
- Average of executed commands per minute.
- Client status: Online, Offline, Executing or Storing.
- The server saves the last command sent in a file with the extension ‘.dnmaptrace’. This feature prevents the server from losing information. In case of shutdown, the server would start scanning from the last command sent.
- New commands can be added to the original command file without stopping the server, it reads them automatically. This allows any process to add new commands dynamically.
- The server remembers the last command sent from each client, so if a client goes down, the command is re-scheduled for later.
- Calculates the running average of commands executed per minute.
- Calculates the historic average of the amount of commands executed per minute.
Figure 2 – dnmap_server.py running.
Figure 3 – Help – dnmap_client.py
The main functionality of the dnmap client is simple:
- Connect to the server and wait for commands to execute.
In the latest version of the tool, the client is getting more complex. Figure 3 above shows the most recent options it presents. The client has implemented some logic to control the nmap scanning rate. The server cannot force the client to perform the scans at a minimum rate. If the command received has the –min-rate nmap option set, the client executes the command ignoring this option. In the other hand, the server can slow down the scan rate by setting a maximum rate with the –max-rate nmap option. The client has also an option to set up the maximum rate. In case of conflict where server and client set up different max rates, the client value has priority.
The prevention of command injection is one of the other improvements made. The client checks the existence of certain malicious characters in the received command and in case of finding any, the command is dropped. This logic seeks to protect clients for executing malicious commands that could harm their machines.
Also, the latest version of dnmap client verifies if the nmap is installed on the system before trying to execute commands. In older versions, the lack of this validation caused the commands executed by a client without nmap installed to be marked mistakenly as scanned, ruining the results.
These are the major features of the dnmap client:
- If the server goes down, the client keeps running. When the server is available again, the client reconnects and sends the pending data.
- The client verifies the commands sent by the server and strips dangerous characters in order to avoid command injection attacks.
- The client only executes nmap commands. Server cannot force the clients to execute another program besides nmap.
- It modifies the command sent by the server to use the known nmap binary in the system.
- It is possible to select an alias for the user. Very useful for tracking when users run many clients in different machines.
- Allows you to set up the port to which the client would connect.
- Forces the command to always store the nmap output locally.
Figure 4 below shows a dnmap client running.
Figure 4 – dnmap_client.py running.
Basic Internet usage:
- First create an empty file and add some nmap commands. For example, the file could be named ‘commands.txt’.
- Be sure the computer that will run the server is reachable from Internet. Your public IP address could be, for example, x.x.x.x. Also make sure the port you are going to use is not being blocked (by default it is TCP/46001)
- Make sure you are standing on the dnmap directory when you execute the server. Otherwise you will need to give the full path of the ‘server.pem’ file.
- Start the server with this command: dnmap_server.py -f commands.txt
- Make sure your clients can reach the server port. Your clients can use the command: hping3 -S -p 46001 x.x.x.x
- Start any amount of clients, from any location on the world: dnmap_client.py -s x.x.x.x -a client1
- Check that the server shows the clients correctly. Also, monitor its behavior for a while to see if the commands get executed fine.
Some more complex connection structures can be created with your friends. In figure 5, a more fun structure is shown. Two friends can connect to their own servers and to their friend’s server to duplicate the scan bandwidth. In this schema, we have two servers and four clients. Any nmap commands planned by both friends get executed in their clients simultaneously. In this way, they can share their connection, especially if they do not send commands at the same time.
Figure 5 – dnmap friend usage.
For running this framework the following software is needed:
- Nmap – Network security scanner
- Python 2.7.x
Dnmap facilitates the process to run thousands of nmap scans automatically. The speed in which you get results is given by the number of clients connected and the bandwidth of each of them. However, as we previously mentioned, this is not enough. In order to get good results, it is necessary to follow a methodology.
It is important to consider the legal aspects of a project like this. In some countries, it is illegal to send more than one TCP packet with the SYN bit activated. It is recommended to get permission before performing such scans.
In the second article of this series, we will describe a four phase methodology that is going to guide you from selecting the goal of the project to checking and verifying the obtained results. We will also show and explain how important it is to elaborate a good command list.
- Internet host count history, Internet Systems Consortium, Inc., http://www.isc.org/solutions/survey/history
- MatesLab hackspace, http://www.mateslab.com.ar
- Twisted framework, http://twistedmatrix.com
- Running average, Wikipedia, http://en.wikipedia.org/wiki/Running_average
- Dnmap, http://sourceforge.net/projects/dnmap/
We've encountered a new and totally unexpected error.
Get instant boot camp pricing
A new tab for your requested boot camp pricing will open in 5 seconds. If it doesn't open, click here.